Anhydrous ammonia storage tanks are of the above ground, carbon steel, horizontal type, stress relieved with spherical heads, ranging in capacity from 1,000 to 60,000 water gallon. Each tank is built in accordance with the latest edition of the ASME Code for Unfired Pressure Vessels, Section VIII, Division 1, rated for 250 to 300 psi and are registered with National Board. The tanks can be supplied completely in accordance with the requirements of DOT 29CFR 1919.111, the recommendations of the Compressed Gas Association Pamphlet G-2 and the American National Standards Institute Pamphlet K-61.1. Tanks can be supplied with a gloss white finish coat of paint and all necessary markings as required by Federal Regulations. Please contact us @ 609-702-8260 for further assistance with your application or email us at rmtech@bellatlantic.net with any questions or request for additional information.

Telephone:           800-775-4280

                             

                              Sales X-1006 and Technical Service X-1005

 

Fax:                      888-533-4884

 

Postal address:    Northeast Office

                              R.M. Technologies of America Inc.

                              3000 Atrium Way, Suite 243

                              Mount Laurel, NJ 08054

 

                              Southeast Office

                              R.M. Technologies of America Inc.

                              1083 N. Collier Blvd., #407

                              Marco Island, FL 34145

Electronic mail:   generalmail@rmtech.net